A.4 to 5 tonnes
B.25 to 30 tonnes
C.40 to 50 tonnes
D.90 to 100 tonnes
Related Mcqs:
- A jack having 2 cm as the diameter of the screw at the root of the thread, may be expected to safely lift a load of about
- A rope sheave of balance weight for the cage is supported on an axle 25 cm. The maximum tension in the rope is 1500 kg. For safe design the point of application of the load should be considered at
- A 6 x 7 steel wire rope indicates
- Kink’ in a steel wire rope is produced
- A mild steel bolt of net cross-sectional area 8.4 sq. cm, diameter 37 will be safe to take a tensile load of about
- In which wire rope application, the highest factor of safety is necessary?
- Which one of the following does not form a part of the specification for steel wire rope?
- In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal
- In a universal testing machine during the testing of a specimen of original cross-sectional area 1 cm2 the maximum load appliied was 7.5 tonnes and neck area 0.6 sq. cm. The ultimate tensile strength of the specimen is
- The tension in the wire rope supporting a lift moving with a uniform velocity
