A.End points
B.Middle of span
C.Anywhere along the span
D.Case should be analysed for various positions of load along the span
E.Data should be taken from hand books
Related Mcqs:
- A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be
- The area under load curve divided by maximum demand represents
- In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal
- If two unequal rolling loads of unequal weight roll along a beam, the maximum bending moment will occur
- The ratio of maximum load to the rated plant capacity is known as
- For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
- A simply supported beam of span L which carries over its full span a load varying uniformly from zero at either ends to W kg/m at mid-span, will have zero shear force at
- A cable is supported at A and B, in which B is higher than A. The tension in the cable will be maximum at
- The bending moment diagram in case of a cantilever beam carrying a linearly varying load from zero at free end to maximum at supported end will be a
- A rope of weight 0.5 kg/m hangs from a drum for a height of 6 m. The work done in winding up the rope will be
