A.12.5 tonnes/cm2
B.10.0 tonnes/cm2
C.7.5 tonnes/cm2
D.4.5 tonnes/cm2
E.None of the above
Related Mcqs:
- A mild steel bolt of net cross-sectional area 8.4 sq. cm, diameter 37 will be safe to take a tensile load of about
- The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be
- Ultimate tensile strength is least in case of
- Ultimate tensile strength is least in case of mild steel and is of the order of
- The machine used for determining tensile strength of steel is
- Which of the following has maximum tensile strength?
- A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be
- Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be __________?
- The percentage reduction of area during tensile test on a cast iron specimen may be
- A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
