A.Tow ropes
B.Slings
C.Drag lines
D.Struck guys
Related Mcqs:
- A rope sheave of balance weight for the cage is supported on an axle 25 cm. The maximum tension in the rope is 1500 kg. For safe design the point of application of the load should be considered at
- A 6 x 7 steel wire rope indicates
- A 25 mm wire rope sling can safely take a load of
- Kink’ in a steel wire rope is produced
- Which one of the following does not form a part of the specification for steel wire rope?
- A stone struck me on the head.
- In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal
- The tension in the wire rope supporting a lift moving with a uniform velocity
- The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if
- A compressed air cylinder carries approximately 70 kg/cm2 pressure at the time of delivery. The inside diameter is 25 cm. If the steel has a yield point of 2300 kg/sq cm and a safety factor of 2.5 the wall thickness should be
