A.6.81 KW
B.7.5 KW
C.66.8 KW
D.5.45 KW
Related Mcqs:
- A tank 2 m square contains one metre of water. Now the tank is accelerated in the horizontal direction parallel to a pair of sides at the rate of 4 m/sec2. In order that there may be no spilling of water the minimum height of the tank should be
- A circulating water pump of a condenser is of the centrifugal type and directly connected to a three phase induction motor running at 900 rpm. The pump delivers 30,000 litres per minute against the dynamic head of 10 m. The horse power of the motor required to drive the pump would be
- If a water tank partially filled with water is being carried on a truck with a constant horizontal acceleration, the level of liquid will
- A seamless water main 1 metre in diameter is required to carry wter under a head of 100 metres. If the maximum permissible tensile stress in the metal is 500 kg/cm2, the thickness of metal required would be
- A 500 litre tank contains a saturated mixture of steam and water at 300?C. If the mass of steam and water within the tank is equal, it can be concluded that
- It is desired to predict the performance of a large centrifugal pump from that of a scale model one fourth the diameter. The model absorbs 20 HP when pumping under test head of 20 m at its best speed of 400 r.p.m. The large pump is required to pump against 60 m head. The following will be the speed of the pump
- A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
- During artrial systole only 30% filling of ventricle is done the remaining 70% filling of the ventricles is done during:
- If the minimum stock level and average stock level of raw material are 4,000 and 9,000 units respectively, find out its reorder quantity.?
- Which hoist is generally preferred for repetitive or high speed lifting?
