A.1 m
B.1.41 m
C.2 m
D.2.32 m
E.4 m
Related Mcqs:
- If the box in above problem is accelerated in a horizontal direction parallel to a pair of sides at the rate of 1 m/sec2, maximum pressure on the top of the box in metres of water would be
- A closed cubical box 0.8 m on each side is half filled with water and the other half being filled with oil of specific gravity 0.75. Now if the box is accelerated upwards at the rate of 4.905 m/sec2 the pressure difference in kg/m2 between the top and bottom layers would be
- The statement — if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing side of the polygon taken in opposite order —- is known as
- If a water tank partially filled with water is being carried on a truck with a constant horizontal acceleration, the level of liquid will
- The net radiant interchange per square metre for two large parallel planes at temperatures of 1000?K and 100?K respectively, would be roughly
- Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is
- A 500 litre tank contains a saturated mixture of steam and water at 300?C. If the mass of steam and water within the tank is equal, it can be concluded that
- The slenderness ratio of vertical comumn of square cross-section of 2.5 cm sides and 600 cm length is
- A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
- A reaction follows the rate expression rate = k CA If the rate is expressed in terms of mole/(1 sec) and the concentration of A (CA) is in mole/lit, the units of the first-order rate constant (k) are
