A.0.7

B.9.52

**C.8.82**

D.9.17

### Related Mcqs:

- A mercury water manometer indicates a gauge difference of 400 mm. The difference in pressure, measured in metres of water, is
- In a mercury differential manometer used for measuring pressure differences across a venturimeter in a water pipeline if an error of 1 mm has been made in observing a differential head of 20 mmthe percentage error in pressure difference is
- The pressure in millimetres of mercury gauge, equivalent to 68 mm H2O plus 54.4 mm manometer fluid, sp. Gr. 2.5 is
- A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
- The total energy grade line in pipe flow is a graphical representation of Bernoullis equation and represents the sum of elevation head pressure head and velocity head measured above
- The temperature difference between water at the surface and the lower levels of the ocean (over a few handred metres) is about
- A mercury (? = 13.6 ?water) barometer has a column height of 29 in. The barometric pressure in psi is
- Mercury is generally used in manometer for measuring
- The pressure in metres of oil (specific gravity 0.85) equivalent to 42.5 m of water is
- Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is