A.99%
B.87%
C.75%
D.63%
Related Mcqs:
- A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
- A uniform steel rope 400 metres long is hung vertically. The weight of the steel is 7.8 gm/cm3 and D = 2100 kg/mm2. The ratio of elongation of first 150 metres to that of first 300 metres would be
- As the compression ratio increases the volumetric efficiency of air compressor
- If stage efficiency is S, blade efficiency is B and nozzle efficiency in N, then
- How many cubic foot of oxygen is required for the complete and perfect combustion of one cubic foot of methane?
- How many cubic foot of air is required for the complete and perfect combustion of one cubic foot of methane
- Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is
- Which of the following refrigerant compressor is not classified as positive displacement compressor
- In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become
- A gas turbine cycle with regenerator has a thermal efficiency of 26%. If intercooler and reheater are also introduced what could be expected thermal efficiency
