A.Nil
B.One
C.Two
D.Four
E.Five
Related Mcqs:
- A vibrating system is said to be stable if
- A vibrating system with unity as damping factor will be
- For a vibrating body, if ratio ?/?n is very high, then phase angle would tend to approach
- A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end. The value of x such that the greatest bending moment in the beam is as small as possible, will be
- The plastic moment of a beam can be 50 percent more than the maximum elastic moment in case the cross-section of the beam is
- A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
- Two beams carrying identical loads simply supported are having same width but beam A has double the depth as compared to that of beam B. The ratio of elastic strength of neam A compared to that of B will be
- Two beams carrying uniformly distributed load have same depth but beams A has width 2nd as compared to width w for beam B. The ratio of elastic strength of beam A compred to that of B will be
- A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
