A.1
B.2
C.4
Related Mcqs:
- Two beams carrying identical loads simply supported are having same width but beam A has double the depth as compared to that of beam B. The ratio of elastic strength of neam A compared to that of B will be
- The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
- A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end. The value of x such that the greatest bending moment in the beam is as small as possible, will be
- For a beam of uniform strength if its depth is maintained constant, then its width will vary in proportion to
- A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
- For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
- The bending moment diagram in case of a cantilever beam carrying a linearly varying load from zero at free end to maximum at supported end will be a
- A simply supported beam of span L which carries over its full span a load varying uniformly from zero at either ends to W kg/m at mid-span, will have zero shear force at
