A.Ends
B.Mid-spam
C.Both at ends as well as mid-span
D.At L/4 from either end
E.None of the above
Related Mcqs:
- The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
- A beam simply supported at ends is subjected to load. The point of contraflexure is located where
- For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
- a diagram which respresents the variation of axial load along the length of simply supported beam is called
- The bending moment diagram in case of a cantilever beam carrying a linearly varying load from zero at free end to maximum at supported end will be a
- A rope sheave of balance weight for the cage is supported on an axle 25 cm. The maximum tension in the rope is 1500 kg. For safe design the point of application of the load should be considered at
- The neutral axis of a simply supported beam is
- Two beams carrying identical loads simply supported are having same width but beam A has double the depth as compared to that of beam B. The ratio of elastic strength of neam A compared to that of B will be
- A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end. The value of x such that the greatest bending moment in the beam is as small as possible, will be
- Two beams carrying uniformly distributed load have same depth but beams A has width 2nd as compared to width w for beam B. The ratio of elastic strength of beam A compred to that of B will be
