A.Double of the actual discharge
B.Square of the actual discharge
C.Actual discharge
D.Half of actual discharge
E.Square root of actual discharge
Related Mcqs:
- The specific speed of a pump is defined as the speed of a pump
- If the specific speed of a pump is calculated as 5000, the type of pump that should be selected is
- If the specific speed of a pump is in the range 170 to 400, the type of pump would be
- A hydro-electric site has a head of 100 m and an average discharge of 10m3/s. Assume 92% efficiency, for a greater speed of 6000 rpm, the specific speed of turbine would be
- In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be
- It is desired to predict the performance of a large centrifugal pump from that of a scale model one fourth the diameter. The model absorbs 20 HP when pumping under test head of 20 m at its best speed of 400 r.p.m. The large pump is required to pump against 60 m head. The following will be the speed of the pump
- Specific speed (fps) = k x specific speed (metric where value of k is (for turbines)
- If you need to Double Underline a Word, how will you do that??
- A right circular cylinder open at the top is filled with liquid (specific gravity 1.2) and rotated about its vertical axis at such speed that half the liquid spills out. The pressure at centre of the bottom is
- In a centrifugal pump installation while starting, the position of delivery valve is
