A.equal quantity of wax will meet on the two rods
B.more wax will melt on copper rod as compared to mild steel rod
C.more wax will melt on mild steel rod as compared to copper rod
D.nothing can be predioted as the data is insufficient
Related Mcqs:
- Three rods one made of glass, one of pure aluminium and one made of wrought iron are heated to 150?C. All the rods are 15 mm in diameter and 300 mm long. The lowest temperature at the free end of the rods will occur in case of
- The average values of modulus of rigidity for Aluminium. Brass Copper, Nickel and Steel in desceading order are given by
- A small plastic boat loaded with pieces of steel rods is floating in a bath tub. It the cargo is dumped into the water allowing the boat to float empty, the water level in the tub will
- Two rods A and B are subjectd to equal load P. Rod A is tapering with bigger diameter D at the support and small end diameter as D/2. Rod B is of uniform cross section with diameter D. The ratio of elongation of rod A to that of B would be
- The average values of modulus of rigidity for aluminium brass, copper and steel in descending order is
- Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
- A load of 10,000 kg is applied to copper cylinder 20 cm long and 5 cm in diameter causes the length to increase by 4 mm and diameter to decrease by 0.4 mm. The Poisson’s ratio for copper would be
- The coefficient of static friction will have the highest value in case of
- Rods of cones in the vertebrate eyed differ in one of the following respects:
- The process by which steel is coated by a thin layer of phosphate is known as
