A.2
B.4
C.8
E.?
Related Mcqs:
- Two beams carrying uniformly distributed load have same depth but beams A has width 2nd as compared to width w for beam B. The ratio of elastic strength of beam A compred to that of B will be
- For a beam of uniform strength if its depth is maintained constant, then its width will vary in proportion to
- The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
- A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
- When a number of loads rest upon a beam, dflection at any point is equal to the sum of the deflections at the point due to each of the loads taken separately. This statement is known as
- a diagram which respresents the variation of axial load along the length of simply supported beam is called
- A beam simply supported at ends is subjected to load. The point of contraflexure is located where
- The neutral axis of a simply supported beam is
- For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
- A simply supported beam of span L which carries over its full span a load varying uniformly from zero at either ends to W kg/m at mid-span, will have zero shear force at
