A.100
B.200
C.500
D.900
E.1000
Related Mcqs:
- Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
- When a beam having square cross-section is loaded longitudinally, the shear stress develops
- The area around the centre of gravity of a cross-section within which any load applied will produce stress of only one sign throughout the entire cross-section, is known as
- A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
- An unknown weight falls through 1 cm on a collar rigidly attached to the lower end of a vertical bar 3 m long and 6 m2 in section. If the maximum instantaneous extension is 2 mm the value of stress would be
- Two rods A and B are subjectd to equal load P. Rod A is tapering with bigger diameter D at the support and small end diameter as D/2. Rod B is of uniform cross section with diameter D. The ratio of elongation of rod A to that of B would be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
- Two shafts are made of mild steel one having circular cross-section and the other shaft is hollow circular with inner diameter half of the outer diameter. The ratio of the torque that can be transmitted in two cases will be
- A most economical channel section is one which for a given cross-section area
- A U-tube of uniform cross-section is partially filled with a liquid A. Another liquid B which does not mix with liquid A is pour3ed into one side. It is found that the liquid levels of the two sides of the tube are the same. While the level of liquid A has risen by 2 cm. If the specifics gravity of liquid A is 1.1 the specific gravity of liquid B must be
