The deflection of a beam may be reduced by ____________?

Strength Of Materials Mcqs
BILAL KHATTAK0

A.decreasing the depth of beam
B.increasing the span
C.providing greater end restrains
D.any of the above methods

Deflection can be reduced by increasing depth of beam, reducing the span, providing greater end restraints or by other means such as providing camber.

Related Mcqs:

  1. A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
  2. A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
  3. The coefficient of friction between chip and tool is the variable. It can be reduced by
  4. Corrosion is prevented or its rate is reduced by
  5. A beam supported at more than two places is known as
  6. A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
  7. The effect of corona can be reduced by
  8. The web bukling in beams may be avoided by
  9. Deforestation has reduced rainfall in the tropical lands.
  10. Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then

Leave a Reply

Your email address will not be published. Required fields are marked *