A.Piping system
B.Loading system
C.Gating system
D.Entry system
E.Delivery system
Related Mcqs:
- During the passage of molten metal through the coke, the carbon percentage of the molten metal increases. The absorption of carbon depends on
- A casting process which can produce cylinders by inserting cores into molten metal poured in the mould is
- If dross and slag along with the liquid metal reach the mould cavity they produce the defect known as_______________?
- A defect in castings in which a discontinuity is formed due to the imperfect fusion of two streams of metal in the mould cavity is known as
- The defect known as ‘drop’ occurs when the upper surface of the mould cracks and pieces of sand fall into the molten metal. This defect occurs due to
- Shrinkage cavity in a casting may be formed due to
- The process of bringing out the lustre of metal usually by the use of cloth wheels is known as
- The pouring of molten metal during casting should be stopped when
- The tool used to make small holes in the sand mould to allow passage of gases/steam is known as
- In which type of welding molten metal is poured for joining the metals
