A.Right hand
B.Right hand withmore clerance
C.Right hand with less clearance
D.Left hand
E.Left hand with more clearance
Related Mcqs:
- A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be
- While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
- If screw threads are to be used in a situation involving high stresses in one direction only, the types of threads suitable for this would be
- When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at
- A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following:
- A second hand car is purchased for 2,00,000 and sold at 1,40,000 after two years. If depreciation is charged @ 10% on written down value method, find the profit or loss on sale of the Second hand car??
- The clamping nut of the turn buckle has
- Loss of engine compression can result from
- The pitch of threads on a lock-nut is
- The included angle in Acme threads is
