A.3-25 HP
B.25-35 HP
C.35-50 HP
D.50-75 HP
E.75-100 HP
Related Mcqs:
- In a V-belt having B section may be used when the load to be transmitted is
- V belt having cross-section A is suitable for usual load of 5 HP. If 15 HP load is to be transmitted
- When power is transmitted through a considerable distance by means of water under pressure, the maximum power is transmitted when
- For maximum horse power transmission in belt drives the velocity of belt left such that the ration tight side driving tension/centrifugal tension is
- The voltage of a 2 wire de system is raised from 200 V to 400 V. For the same power transmitted over the same distance and for the same power loss, the saving in conductor copper will be
- The belt drive can transmit maximum power when maximum total tension in belt equals
- Approximate horse power that can be transmitted by a shaft 60 mm diameter at 180 r.p.m. with permissible shear stress of 850 kg/cm2, would be
- V-belt sections generally used in an automobiles are
- The power is transmitted by lead screw to the carriage through
- In an at tomobile the power is transmitted from gear box to differential through
