A.1 mm
B.2 mm
C.5 mm
D.8 mm
E.10 mm
Related Mcqs:
- A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
- A seamless water main 1 metre in diameter is required to carry wter under a head of 100 metres. If the maximum permissible tensile stress in the metal is 500 kg/cm2, the thickness of metal required would be
- A boiler shell 280 cm diameter and plate thickness 12 mm is subjected to an internal pressure of 1.2 MN/m2. The hoop stress will be
- A boiler shell 100 cm diameter and plate thickness 12 mm is subjected to an internal pressure of 1.2 N/m2. The hoop stress will be
- The safe working pressure for a spherical vessel 1.5 m diameter and 1.5 cm wall thickness with limiting tensile stress of 450 kg/cm2 would be
- A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be
- A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
- What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2
- In case of quadruple riveted butt joints the joint efficiency is usually assumed in the range
- A pressure vessel is said to be thin walled when the ratio of internal diameter of the vessel and wall thickness is
