A.2 times
B.4 times
C.8 times
D.16 times
E.1/2 times
Related Mcqs:
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
- A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
- If the load at the free end of a cantilever beam is increased, the failure will occur
- The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
- The bending moment diagram in case of a cantilever beam carrying a linearly varying load from zero at free end to maximum at supported end will be a
- Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
- If unit loads rest upon a beam at two points A and B, the deflection at A due to unit load at B, equals the deflection at B due to the unit load at A. This is known as
- The deflection of a beam may be reduced by ____________?
- A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end. The value of x such that the greatest bending moment in the beam is as small as possible, will be
- A uniform beam of effective length L, fixed at one end and loaded uniformly will have maximum deflection at
