A.0.2 kg/sq-cm
B.9.774 kg/sq-cm
C.77.4 mm of Hg
D.3.2526 kg/sq-cm
E.1.025 kg/sq-cm
Related Mcqs:
- If a barometer carries wter instead of mercury, the height of column for a pressure equivalent to 75 cm of mercury will be
- A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
- In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be
- A mercury (? = 13.6 ?water) barometer has a column height of 29 in. The barometric pressure in psi is
- Stainless steel Bourdon tube pressure gauge joints are usually
- Nickel is the major constituent of which the following pressure gauge Bourdon tube material
- If a steam pressure of 10 kg/cm2 is to be measured, the range of pressure gauge should be
- A vacuum of 712 mm was obtained with the barometer reading 753 mm of mercury. The corrected vacuum to a standard barometer of 760 would be
- A tube of length h which is wide enough to make surface tension effects negligible is closed at one end. It is then lowered into a tank of mercury of depth h and the mercury rises to a distance x into the tube. If the mercury barometer stands at h also then
- The pressure in millimetres of mercury gauge, equivalent to 68 mm H2O plus 54.4 mm manometer fluid, sp. Gr. 2.5 is
