A.10? to 15?
B.15? to 20?
C.25? to 30?
D.35? to 40?
E.60? to 75?
Related Mcqs:
- The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be
- In a Buttress dam, when the height of dam is 10 m to 25 m, the spacing of buttress is usually restricted to
- A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is
- Which one of the following is not a disadvantage due to a Buttress dam?
- In Buttress dam, too flat a slope causes
- Which one of the following is not usually considered particular advantage of a Buttress dam?
- In case of Buttress dams, too steep slopes
- In Buttress dam the column or slenderness ratio is usually maintained between
- A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly
- The king pin inclination is usually
