A.50 kg/ cm2
B.100 kg/ cm2
C.150 kg/ cm2
D.200 kg/ cm2
E.Zero
Related Mcqs:
- Which assumption is not valid in the analysis of gravity dams
- If a solid cube is subjected to equal tensile stresses on all its faces the volumetric strain is n times the linear strain, where
- In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
- When metal is deformed by cold work, severe stresses known as residual stresses are undesirable and to remove them
- A seamless water main 1 metre in diameter is required to carry wter under a head of 100 metres. If the maximum permissible tensile stress in the metal is 500 kg/cm2, the thickness of metal required would be
- The yield point in fatique loading as compared to the yield point in static loading is
- A piece of metal of specific gravity 3.4 floats in mercury of specific gravity 13.6. What fraction of its volume is under mercury
- If a lead acid battery is fully charged at specific gravity of 1.28 and fully discharged at specific gravity of 1.11 then at specific gravity of 1.19, the battery will be
- Rocks with excessive internal stresses which may cause spalling are known as
- The magnitude of earthquake pressure on a dam varies as a function of
