A.90 percent
B.81 percent
C.91 percent
D.93.18 percent
E.None of the above
Related Mcqs:
- In gas and petrol engines thermal efficiency may be expected in the range
- In diesel engines thermal efficiency may be expected in the range
- Thermal efficiency of a gas turbine is in the range
- It is desired to predict the performance of a large centrifugal pump from that of a scale model one fourth the diameter. The model absorbs 20 HP when pumping under test head of 20 m at its best speed of 400 r.p.m. The large pump is required to pump against 60 m head. The following will be the speed of the pump
- A gas turbine cycle with regenerator has a thermal efficiency of 26%. If intercooler and reheater are also introduced what could be expected thermal efficiency
- A four stroke petrol engine is designed to develop 35 BHP at 200 RPM. It has an indicated mean effective pressure of 20 kg/cm2, a stroke of 35 cm and a bore diameter of 20 cm. Using this data mechanical efficiency of the engine at the running condition given would be closest to
- A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
- With increase in pressure ratio, thermal efficiency of a simple gas turbine plant with fixed turbine inlet temperature
- The efficiency of cycle would be
- The efficiency of mechanical brakes is usually
