A.Anodising
B.Parkerising
C.Spheroidizing
D.Phosphorizing
E.Sheradising
Related Mcqs:
- Process of making a thin phosphate coating on steel to act as a base or primer for enamels and paints in known as
- Any process of heating and cooling steel that produces a rounded or globular from of carbide is known as
- The process of reheating hardened steel to temperature below the lower critical temperature followed by any desired rate of cooling, is known as
- Two rods one of copper and the other of mild steel, both of diameter 20 mm and length 250 mm are coated with a uniform layer of wax all around. These rods are placed vertically in a boiling water bath with 200 mm, length of each rod projecting outside. If the melting point of wax is 10?C, then
- Tin coated low carbon steel chaplets are used in
- Nitriding is a process for
- The process of heating iron base alloys to approzimately 40?C above the critical temperature range followed by cooling to below that range in still air at ordinary temperature is known as
- The process of shaping thin metals by pressing it against form while it is rotating is known as
- The process for steel making being used at Rourkela steel plant is
- Electric process for steel making is used in which of the following steel plant?
