A.200 kg
B.167.2 kg
C.836 kg
D.41.8 kg
E.100 kg
Related Mcqs:
- A tube of length h which is wide enough to make surface tension effects negligible is closed at one end. It is then lowered into a tank of mercury of depth h and the mercury rises to a distance x into the tube. If the mercury barometer stands at h also then
- Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
- Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible)
- A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be
- The tension in the wire rope supporting a lift moving with a uniform velocity
- A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2?
- A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero
- A rope sheave of balance weight for the cage is supported on an axle 25 cm. The maximum tension in the rope is 1500 kg. For safe design the point of application of the load should be considered at
- For a beam of uniform strength if its depth is maintained constant, then its width will vary in proportion to
- A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is
