A.Same as in case of constant thermal conductivity
B.More than that in case of constant thermal conductivity
C.Less than that in case of constant thermal conductivity
D.Depends on other factors
E.None of the above
Related Mcqs:
- A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C
- A wall has two layers A and B, each made of a different material. Both the layers have the same thickness. The thermal conductivity of material of A is twice that of B. Under the thermal equilibrium the temperature difference across the wall is 30?C. The temperature drops in layers A and B will be respectively
- The rate of heat loss through a furnace wall is 1000 kcal per hour when inside temperature is 1000?C and outside wall temperature is 500?C. What should be the wall thickness in case the thermal conductivity of wall material is 0.5 kcal/m-hr?C
- The face temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of wall material is 0.30 kcal/m-hr-?C. For a wall thickness of 20 cm, the rate of heat conduction per square meter of wall area will be
- The surface temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of the wall material is 0.30 kcal/m-hr-?C. The heat flux for a wall of 20 cm thickness will be
- The rate of heat flow from a 50 mm thick wall of material having thermal conductivity of 40 W/m?C for a temperature difference of 10?C will be
- There metal walls of same cross-sectional area having thermal conductivity in the ratio 1 : 2 : 4 transfer heat at the rate of 15000 kcal/hr. For same thickness of wall, the temperature deop will be in the ratio
- Which of the following material has thermal conductivity closest to silver?
- For glass wool the thermal conductivity varies from sample to sample because of variations in
- Which of the following property of air does not increase with rise in temperature?
