A.20?C and 10?C
B.10?C and 20?C
C.15?C and 15?C
D.cannot be predicated
Related Mcqs:
- A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C
- The rate of heat loss through a furnace wall is 1000 kcal per hour when inside temperature is 1000?C and outside wall temperature is 500?C. What should be the wall thickness in case the thermal conductivity of wall material is 0.5 kcal/m-hr?C
- The face temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of wall material is 0.30 kcal/m-hr-?C. For a wall thickness of 20 cm, the rate of heat conduction per square meter of wall area will be
- The surface temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of the wall material is 0.30 kcal/m-hr-?C. The heat flux for a wall of 20 cm thickness will be
- The rate of heat flow from a 50 mm thick wall of material having thermal conductivity of 40 W/m?C for a temperature difference of 10?C will be
- If thermal conductivity of a material of wall varies as ko (1 – ?t ). The temperature at the centre of the wall will be
- The ratio of heat flow QA/QB from two walls of same thickness having thermal conductivity kA = 2 kB, for the same temperature difference will be
- There metal walls of same cross-sectional area having thermal conductivity in the ratio 1 : 2 : 4 transfer heat at the rate of 15000 kcal/hr. For same thickness of wall, the temperature deop will be in the ratio
- In which case the value of thermal conductivity drops with rising temperature
- In the temperature of air above a pond is 8?C thermal conductivity of ice is 0.005 C.G.S. units, latent heat of fusion of ice is 79.9 cal/gram the density of ice is 1 gm/cu.m, the time taken for the formation of ice layer of 1 cm thickness is
