A.100 HP
B.75-90 HP
C.60-75 HP
D.30-60 HP
E.3 to 20 HP
Related Mcqs:
- V belt having cross-section A is suitable for usual load of 5 HP. If 15 HP load is to be transmitted
- A V-belt having B section is generally used when the power to be transmitted is in the range
- The area around the centre of gravity of a cross-section within which any load applied will produce stress of only one sign throughout the entire cross-section, is known as
- A beater machine in a pulp mill is driven by a 50 H.P. motor using 6 vee belts of D section. If one of the belt breaks after a month
- In case of a cotter joint the compressive load is transmitted from one rod to another rod
- An axial hoad is applied on a circular section of diameter D. If the same load is applied on hollow circular section with inner diameter D/2, the ratio of stress in two cases would be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
- A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
- An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
