A.100 kVA
B.150 kVA
C.200 kVA
D.250 kVA
E.300 kVA
Related Mcqs:
- The power factor of a load of 100 kW is to be raised from 0.5 lagging to 0.9 lagging. The KVA rating of the capacitor will be
- A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
- The power factor of a three phase induction motor at no load will be
- The average load factor of thermal power plants in India is
- The power factor of a 3 phase induction motor near full load is expected to be around
- The minimum demand on a power station is 10 MW. If the annular load factor is 40%, total evergy generated per year will be
- In a system if base load is same as maximum demand, the load factor will be
- The fill factor (the ratio of the maximum useful power to the ideal power) for a silicon cell may vary from
- Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
- A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be
