A.1.0 kg/sq-cm
B.1.7 kg/sq-cm
C.1.0 kg/sq-cm
D.10.2 kg/sq-cm
E.None of the above
Related Mcqs:
- For steam engine having a throttle governor, a straight line is obtained when the total weight of steam used per hour is plotted against the indicated horse power. This line is known as
- The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
- A four stroke petrol engine is designed to develop 35 BHP at 200 RPM. It has an indicated mean effective pressure of 20 kg/cm2, a stroke of 35 cm and a bore diameter of 20 cm. Using this data mechanical efficiency of the engine at the running condition given would be closest to
- A map of Germany drawn on a scale 1:1000/000 has shrunk that its length and breadth are now j of its original. The scale would be:
- The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is
- Rankine cycle efficiency for fixed steam temperature of any volume upto critical temperature will be maximum for steam pressure of
- In the fuel injection pumps for Diesel engine the effective pressure strokes of the plungers in the fuel injection pump are regulated by means of a
- A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
- The pressure of steam in a steam locomotive system is
- a diagram which respresents the variation of axial load along the length of simply supported beam is called
