A.The body attached to the lower end of wire or rod must be elastic
B.The clamp must be elastic
C.The clamp must be elastic
D.(A) and (B) above
E.(A), (B) and (C) together
Related Mcqs:
- Which is expected to be strongest in tension?
- Two rods one of copper and the other of mild steel, both of diameter 20 mm and length 250 mm are coated with a uniform layer of wax all around. These rods are placed vertically in a boiling water bath with 200 mm, length of each rod projecting outside. If the melting point of wax is 10?C, then
- A piece of paper wrapped tightly on a copper rod will get charred relatively slowly when held over a flame as compared to a piece of paper wrapped tightly on any of the following rod except:
- ______the audit risks_______the materiality and_________the audit effort.?
- Music wire
- The modulus of resilience is
- In order to balance the reciprocating masses, the conditions to be satisfied are
- If a particle of a link has a velocity when changes both in magnitude and direction at any instant, then
- For two meshing gears, their
- Three rods one made of glass, one of pure aluminium and one made of wrought iron are heated to 150?C. All the rods are 15 mm in diameter and 300 mm long. The lowest temperature at the free end of the rods will occur in case of
