A.5 ? 7
B.7 ? 10
C.10 ? 15
D.15 ? 20
E.20 ? 25
Related Mcqs:
- A Carnot refrigerator extracts 100 kcal of heat per minute from a cold room which is maintained at – 15?C and it is discharged to atmosphere at 30?C. The horse power required to run the unit would be
- In which operation the horse power required to remove one cubic centimetre of material (soft steel) per minute under average conditions will be maximum
- A Carnot refrigerator extracts 100 kcal of heat per minute from a cold room which is maintained at – 15?C and it is discharged to atmosphere 30C?. The horse power required to run the unit would be
- A shaft running at 300 rpm is required to transmit 300 horse power. The working stress in shear is 420 kg/cm2. The diameter of the shaft whould be in the range
- A circulating water pump of a condenser is of the centrifugal type and directly connected to a three phase induction motor running at 900 rpm. The pump delivers 30,000 litres per minute against the dynamic head of 10 m. The horse power of the motor required to drive the pump would be
- In above problem, what will be the horse power required to drive the pump?
- The horse power required to move a belt conveyor increases as
- Pressure of vibrations received by membrane of fenestra ovalis are received by perilymph present in:
- Which of the following cycle consists of two constant pressure and two adiabatic processes?
- Maximum horse power of a steam locomotive is
