A.0.5
B.1
C.1.73
D.2
E.2.45
Related Mcqs:
- A shaft running at 300 rpm is required to transmit 300 horse power. The working stress in shear is 420 kg/cm2. The diameter of the shaft whould be in the range
- Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
- If this shaft is to be replaced by a hollow shaft of texternal diameter 22 mm for the same maximum shear stress and same torque, the internal diameter will be
- Approximate horse power that can be transmitted by a shaft 60 mm diameter at 180 r.p.m. with permissible shear stress of 850 kg/cm2, would be
- It is desired to punch a hole of 20 mm diameter in a plate 20 mm think. If the shear stress of mild steel is 30 kg/mm2, the force necessary for punching would be approximately in the range
- The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
- The safe working pressure for a spherical vessel 1.5 m diameter and 1.5 cm wall thickness with limiting tensile stress of 450 kg/cm2 would be
- Approximate horse power that can be transmitted by a shaft 60 mm dimeter at 180 rpm with permissible shear stress of 850 kg/cm2 would be
- A spring steel ribbon 3.2 mm wide, 0.5 mm thick is wound on a 500 mm diameter cylinder. If E = 2 x 105 N/mm2, the maximum stress in the steel will be
- The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
