A.1
B.1.5 to 2
C.2 to 5
D.5 to 6
E.More than 6
Related Mcqs:
- A Carnot refrigerator extracts 100 kcal of heat per minute from a cold room which is maintained at – 15?C and it is discharged to atmosphere at 30?C. The horse power required to run the unit would be
- The adiabatic horse power required to deliver 4 cu. M per minute of free air from 1 ata and 15?C to a received pressure at 7 ata would be in the range
- In which operation the horse power required to remove one cubic centimetre of material (soft steel) per minute under average conditions will be maximum
- A refrigerating machine working on Reversed Carnot cycle takes out 2 kW per minute of heat from the system while working between temperature limits of 300?K and 200?K. The C.O.P. and power consumed by the cycle will be
- A Carnot refrigerator operates between 300.3 K and 273 K. The fraction of cooling effect required as work input is
- A circulating water pump of a condenser is of the centrifugal type and directly connected to a three phase induction motor running at 900 rpm. The pump delivers 30,000 litres per minute against the dynamic head of 10 m. The horse power of the motor required to drive the pump would be
- In above problem, what will be the horse power required to drive the pump?
- The horse power required to move a belt conveyor increases as
- 2 HP per ton of refrigeration is required to maintain the temperature of – 40?C in the refrigerator if the refrigeration cycle works on Carnot cycle. The COP of the cycle would be
- If the door of a refrigerator in a room is left open, the temperature of the room will
