The difference between a plate and sheet is

Production Engineering Mcqs
BILAL KHATTAK0

A.A sheet is more than 5 mm in thickness
B.A plate is less than 5 mm in thickness
C.A sheet is always more than 5 metres in length
D.A sheet is always less than 5 mm thick and a plate more than 5 mm thick
E.Sheet and plate are same and thickness is immaterial

Related Mcqs:

  1. With a punch for which the maximum crushing stress is 4 times the maximum shearing stress of the plate, the biggest hole that can be punched in the plate would be of diameter equal to
  2. A strip is
  3. The rivet diameter should be
  4. Compare the heat loss between the absorber plate of flat-plate collector and the cover with that between the cover and the ambient air at steady state.
  5. Arrangement of Balance Sheet in a logical order is known as __________??
  6. A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C
  7. Which of the following statements are / is true? – Events after Balance Sheet are??
  8. A foil is
  9. In case the hydrodynamic and thermal boundary layers are identical for a fluid flowing over a heated plate
  10. Evacuated flat-plate collectors are better than non-evacuated ones at high operating temperatures because

Leave a Reply

Your email address will not be published. Required fields are marked *