A.4 — 6
B.10 — 12
C.12 — 20
D.20 — 24
E.24 — 32
Related Mcqs:
- The length of a hacksaw blade is measured from
- A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be
- Standard taper generally used on milling machine spindles is
- According to economists, one power driven machine replace almost _________ workers:
- Depreciation charges for a machine are thirty paise per working hour. The machine has a scrap value of Rs. 2000 and a working hour average life of 24000 hours. The purchase price of the machine would be
- In order to avoid interference for 20 pressure and teeth, minimum number of teeth should be
- Compressed air is required generally in which of the following power plants?
- A single unit of 50 MW is generally not available with which type of power plant?
- Phase, advancers for power factor improvement are generally used for
- A V-belt having B section is generally used when the power to be transmitted is in the range
