A.14 TPI
B.18 TPI
C.20 TPI
D.32 TPI
E.4- TPI
Related Mcqs:
- Inside and outside diameters of a thin tube are to be measured. Only one of the following tools is to be selected. Which one would you choose?
- In case of axial flow compressors for minimum fluid driction and blade tip clearance losses, the blades of an axial flow compressor are disigned for
- A solid circular shaft and a thin walled circular tube made of the same material and having the same weight are stressed in torsion to the same maximum shear stress. The ratio of the amounts of strain energy stored in the two shafts would be
- A Hack-saw blade cuts on
- Which of the following temperature measuring devices is widely used measure tube side temperature in a shell and tube heat exchanger?
- The length of a hacksaw blade is measured from
- The width of slot eut by a hack-saw blade is
- Hack-saw blades having the number of teeth as given below are available. Which one would you chose for cutting brass
- In a power hacksaw machine blade the number of teeth per inch are generally
- A tube of length h which is wide enough to make surface tension effects negligible is closed at one end. It is then lowered into a tank of mercury of depth h and the mercury rises to a distance x into the tube. If the mercury barometer stands at h also then
