A.Fine
B.Very fine
C.Coarse
D.Same as that of nut
E.None of the above
Related Mcqs:
- A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following:
- The pitch of 24 mm diameter metric threads would be
- While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
- If screw threads are to be used in a situation involving high stresses in one direction only, the types of threads suitable for this would be
- If M 20 coarse pitch is 2.5 mm the mm the fine pitch for the size would be
- If the threads on a bolt are right hand the threads on nut will be
- Steel recommended for induction hardening should have
- A double start screw has
- Soil particles of size 0.03 mm belong to the class of:?
- A gear has a pitch diameter of 5.732 inches and circular pitch
