A.25%
B.33%
C.41%
D.47%
E.55.50%
Related Mcqs:
- The maximum efficiency of a scres jack having square threads and friction angle of 30 degree will be
- The maximum efficiency of a screw jack provided with square threads and angle of friction 30? will be
- Efficiency of a screw jack in maximum when its 31 helix angle, ? is
- A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co–efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be
- A screw jack spindle is provided with
- The included angle in Acme threads is
- The included angle of American National threads is
- While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
- A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg (
- A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be
