A.Lead = pitch
B.Lead = 2 x pitch
C.Lead = 3 x pitch
D.Pitch = 3 x lead
E.Pitch = 2 x lead
Related Mcqs:
- The crest diameter of a screw thread is same as
- Screw parts with a right hand thread must only be stressed
- A jack having 2 cm as the diameter of the screw at the root of the thread, may be expected to safely lift a load of about
- A self-socking screw is one which
- A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg (
- In case of helical gears the angle between the plane containing the axes of the gear and plane passing through the pitch point is known as
- While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
- The pitch point on a cam is
- A half nut is
- Gears for wrist watches are generally manufactured by
