A.Directly
B.Via cotter
C.Via cotter pin
D.Via collar
E.None of the above
Related Mcqs:
- In a cotter joint in order to ensure that cotter does not work back
- V belt having cross-section A is suitable for usual load of 5 HP. If 15 HP load is to be transmitted
- Compressive strength is highest in case of
- In a V-belt having B section may be used when the load to be transmitted is
- In case of a knuckle joint the pin is likely to fail in
- A tower subjected to load W has self-weight 2W. It is to be designed for constant compressive stress at all sections. The cross-section of the tower should have
- Lowest value of joint efficiency is assumed in case of
- The frictional torque transmitted by a cone clutch is the same as that of
- A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than
- A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
