A.33 inch Hg
B.31.6 ft water
C.1.013 kg/cm2
D.75.6 cm of Hg
E.14.1 psi
Related Mcqs:
- A short tube mouthpiece will not run full at its outlet if the head under which the orifice work is
- The output quality of a printer is measured by____________?
- The total energy grade line in pipe flow is a graphical representation of Bernoullis equation and represents the sum of elevation head pressure head and velocity head measured above
- Bougainvillaea multicolour is:
- The voltage required for good desalting of curde petroleum is approximately
- Total installed cost of a centrifugal pump coupled with drive and capable of developing 1000 ft head at 500 gpm is to be calculated using Rs. 55000 as the cost of a pump of 500 ft head at 1000 gpm. The cost estimation method involves the term capacity which will be taken as (gpm)x (head)y where
- A hydro-electric plant is usually temed as high head plant when the head is
- Which of the following has higher thermal conductivity as compared to the remaining?
- A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg (
- In case of meter gauge locomotives the distance between wheel centres is
