A.n = 1
B.n = 2
C.n = 3
D.n = 6
E.n = 9
Related Mcqs:
- A solid cube is subjected to equal normal forces of the same type on all its faces. The ratio volumetric strain/liner strain in any of the three xes will be
- The coefficient of linear expansion of a solid is L. The volume V of a cube of this solid on being heated by 1?C will change by
- In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
- Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
- By the usual gravity analysis as per B.I.S., the permissible tensile stresses at the upstream face of the dam under earthquake loading, should not exceed
- A cube of wood supporting 200 gm mass just floats in water. When the mass is removed, the cube rises by 2 cm the side of the cube will be
- The stress strain curve for a glass rod during tensile test would exhibit
- Some substances generate voltage when they are subjected to mechanical forces or stresses along specific planes. Such subtances are known as
- When metal is deformed by cold work, severe stresses known as residual stresses are undesirable and to remove them
- Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
