A.copolymer
B.dilatant
C.plastic
D.elastomer
Related Mcqs:
- Which of the following polymer is crystalline?
- A fluid in which resistance to deformation is independent of the shear stress is known as
- The ratio of bending moment at the centre of a simply supported beam of effective length L subjected to a central load W with that when the load W is uniformly distributed, will be
- If a material recovers its original dimensions, when the load is removed, it is known as
- Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
- A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
- A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
- Concentrated solution of sugar is a
- The limiting load beyond which the material no longer behaves elastically is known is
