A.1250 N
B.6750 N
C.9860 N
D.13500 N
E.20250 N
Related Mcqs:
- In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be
- In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be
- An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
- What is the maximum force, in Newtons, that will not cause tension?
- An axial hoad is applied on a circular section of diameter D. If the same load is applied on hollow circular section with inner diameter D/2, the ratio of stress in two cases would be
- A load of 10,000 kg is applied to copper cylinder 20 cm long and 5 cm in diameter causes the length to increase by 4 mm and diameter to decrease by 0.4 mm. The Poisson’s ratio for copper would be
- A strip of steel 75 mm wide 40 mm thick is bent round a circular drum of 4.96 m outside diameter. If E = 2 x 105 N/mm2, the maximum stress due to bending will be
- Depreciation charges for a machine are thirty paise per working hour. The machine has a scrap value of Rs. 2000 and a working hour average life of 24000 hours. The purchase price of the machine would be
- A turbine model test with 260 mm diameter showed an efficiency of 90 percent. The efficiency that can be expected from a 1.2 m diameter impeller is
- The ratio of stress produced by suddenly applied load to that produced by the same load when gradually applied is
