A.10–4
B.10–5
C.10–7
Related Mcqs:
- The failure of a material under varying load, after a number of cycles of such load, is known as
- In a load cell, strain gauge acts as a
- A uniform steel rope 400 metres long is hung vertically. The weight of the steel is 7.8 gm/cm3 and D = 2100 kg/mm2. The ratio of elongation of first 150 metres to that of first 300 metres would be
- A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
- A strain gauge material should have low
- A strain gage material should have low
- Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
- The carrier material used with strain gauges at room temperature is
- The carrier material used with strain gages at room temperatuer is
- The phenomenon under which the strain of a material varies under constant stress is known as
