A.0.25 m/sec2
B.2.45 m/sec2
C.1.25 m/sec2
D.4.00 m/sec2
E.4.16 m/sec2
Related Mcqs:
- A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly
- A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was
- A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used?
- A particle starts from rest and moves in a straight line whose equation of motion is given by S = 2t3 – t2 – 1. The acceleration of the particle after one sec will be
- A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is
- What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs.
- In case of friction clutch the coefficient of friction is expected to be
- Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible)
- The coefficient of friction is
- Which of the following bearing will have least coefficient of friction
