A.152 t
B.76 t
C.38 t
D.19 t
E.8.5 t
Related Mcqs:
- A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be
- A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately?
- A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range
- A body having an initial velocity of 10 m/s moves 200 mm in 5 sec when a force of 20 kgf is applied to it. If the acceleration due to gravity is 9 m/s2 the weight of the body should be
- A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly
- A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be
- The amount of force exerted over an area of surface is called____________?
- The statement: If a maximum of gases or vapours is enclosed in a container, each will exert its own pressure on the container entirely independent of the others and the total absolute pressure will be equal to the sum of the partial pressure exerted by each of the gases. This statement is known as
- A steel wire is hang vertically under its own weight. What is the greatest length it can have if the allowable tensile stress is 2000 kg/cm2 and specific weight of steel is 8000 kg/cm
- A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is